Solutions

The use of a ladder to gain access to a high level workstation can pose an element of risk. The purpose of the Stopcable™ S system is to ensure the safety of personnel throughout their ascent.

The Stopcable™ S vertical lifeline is a mobile anchoring device to enable a person to move on a vertical axis in perfect safety and without having to disconnect themselves. It is made up of a fixed point and individual mobile equipment.

The Stopcable™ S vertical lifeline was designed, created and tested to comply with the requirements of the EN353-1 and EN353-2 Standards.

The FABA™ A12 System has been on the market since 1995. It is a logical evolution to the FABA™ A11 System but a lighter and smaller version. The design of the safety rail and carriages is asymmetrical and guarantees that the carriages are always used in the right direction.

• Dimensions rail profile : 48 x 32 x 3 mm
• Material : Hot-dipped galvanised steel or stainless steel (1.4571)
• Design : Ladder with central upright or just rail
• Spacing in between stops : 40 mm
• Spacing in between rungs : 280 mm
• Rungs : Straight and welded on the back of the rail
• Width of the ladder : 380 mm
• Primary lengths : 5600 and 2800 mm
• Adjustment lengths : 560, 840, 1120, 1400, 1680, 1960, 2240, 2520, 3080, 3360, 3640, 3920, 4200, 4480, 4760, 5040 and 5320 mm
• Maximum distance between fixings : 1400 mm for the ladder and 1960 mm for the rail

The FABA™ AL2 System has been on the market since 2000. It is based on the principle of the FABA™ A12 System and is suitable for material in anodised aluminum. The design of the safety rail and sliders is asymmetrical and guarantees sliders are always used in the right direction.

• Dimensions rail profile (H-shaped) : 48 x 65 x 3-6mm
• Material : Anodised aluminum
• Design : Ladder with a central upright or with additional side uprights or just rail
• Spacing in between stops : 70 mm
• Spacing in between rungs : 280 mm
• Rungs : Straight, inserted and set on the back of the rail
• Ladder width : 414 mm
• Primary lengths : 5600 and 2800 mm
• Adjustment lengths : 560, 840, 1120, 1400, 1680, 1960, 2240, 2520, 3080, 3360, 3640, 3920, 4200, 4480, 4760, 5040 and 5320 mm
• Maximum distance between fixings : 1680 mm for the ladder with central upright, 2520 mm suitable for ladder with side uprights or the rail.